seems to me you need to declare the bindport= <xxxx> so your external nodes list can be pushed to your server. e.g. ./var/lib/asterisk/rpt_extnodes Thanks, Bob k6ecm 73 Sent from iPad
On Aug 8, 2016, at 12:38 PM, Angelo <aglorioso62@gmail.com> wrote:
Hello All,
I have to manual configure the dial verison of asterisk due to network issues. The 4 nodes seems to be
showing up on the Allstar node list as green but we are unable connect to the other nodes inbound or
outbound. I realize inbound connect request port forwarding of 4569. As for outboud, it should connect
fine.
I suspect it is something in the IAX.conf file that might be causing the issue.
Below is my IAX.CONF file :
; Inter-Asterisk eXchange driver definition ; ;
[general] bindaddr=0.0.0.0 disallow=all allow=gsm allow=g726aal2 allow=ulaw jitterbuffer=yes forcejitterbuffer=yes dropcount=2 maxjitterbuffer=4000 maxjitterinterps=10 resyncthreshold=1000 maxexcessbuffer=80 minexcessbuffer=10 jittershrinkrate=1 tos=0x1E autokill=yes delayreject=yes ;iaxthreadcount=30 ;iaxmaxthreadcount=150
register=42706:*******@register.allstarlink.org ; password commented out wih * register=42707:*******@register.allstarlink.org register=42708:*******@register.allstarlink.org register=42709:*******@register.allstarlink.org
; Incoming radio connections
[radio] type=user disallow=all allow=g726aal2 allow=gsm codecpriority=host context=radio-secure transfer=no
[allstar-sys] type=user context=allstar-sys auth=rsa inkeys=allstar disallow=all allow=ulaw
[allstar-public] type=user context=allstar-public auth=md5 secret=allstar disallow=all allow=ulaw allow=gsm
; Yhe following should be un-commented to support Allstar Autopatch service ;[allstar-autopatch] ;type=peer ;host=register.allstarlink.org ;username=<One of the Node numbers on this server> ;secret=<The node password for the above node> ;auth=md5 ;disallow=all ;allow=ulaw ;transfer=no
Any ideas???
Angelo
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.