I’m told as soon as I write a new piece of software to the drive, I’m in danger of re-writing the data. I don’t have testdisk installed. I’m shutting down the Pi and pulling the card. I can run Testdisk on a PC with the card inserted, I hope. I suppose I can start from scratch with the rpt.conf again if I have to. What started this was, I did something I’m completely scratching my head on. I must have changed something or caused a typo in my original, real rpt.conf file that caused my URI green LED to stop flashing. Simple USB was simply not working any more. I spent a long time re-creating rpt.cof from the rpt.conf.sample file. After it was perfercted, I accidentally deleted it. I suppose I could copy my Original rpt.conf file here to see if any of you could spot the typo causing the URI to go dead. I won’t post unless someone offers to take a look. John From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of ARS W5OMR Sent: Sunday, November 04, 2018 10:16 AM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Question about recovering rpt.conf I hope this helps... https://itsfoss.com/recover-deleted-files-linux/ On Sun, Nov 4, 2018 at 10:49 AM John Griffith <jcarl.griffith@gmail.com <mailto:jcarl.griffith@gmail.com> > wrote: I accidentally deleted my rpt.conf file (so easy to do with the slip of the mouse in WINSCP), but I have not refreshed my node or reloaded anything, therefore my node is still up and running normally. My question is, can I recover my rpt.conf file from the still working cache as my node is still online? John _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV) 73 = Best Regards, -Geoff/W5OMR