The only good way I have found to not have to tear a Baofeng apart is the use of this circuit: https://www.youtube.com/watch?v=QopvHGM-9_k It takes advantage of the DC offset present in the audio connector when there is a signal. This is strongly recommended against a VOX circuit or using VOX in AllStar software because of words getting cut out and unnecessary key/unkey cycles. On Sun, Dec 25, 2016 at 6:55 AM, Buddy Brannan <buddy@brannan.name> wrote:
We'd love to help, but you'll probably need to be more specific. Which "it" are you having trouble with? What isn't working? You'll definitely need to set up the port forwarding in your router. Also, for best results, it's possible you may still need to mod your Baofeng to get audio from the right places, COS, and so on. That's way out of my league though. So where are things alling down?
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Dec 25, 2016, at 12:17 AM, Eric Lessard <lessarderic29@yahoo.com> wrote:
so I have a baofeng uv5r tri power with a pi 2 and a uri! the uri acts as my digital cable so I don't have to tear the ht apart ! I had a couple hams program it but we got into a fight stopped talking and I need help with finalizing my NODE setup and I'm thinking I should reprogram it?? any ideas?? + I need to figure out how to port forward it??? plz help! _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com