that will be correct *after* I update them into SVN. You can follow the upgrade from SVN procedure in the 'support' section of the allstarlink.org website. JIM From: george@dyb.com To: telesistant@hotmail.com; jd0@broadsci.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux Date: Tue, 30 Aug 2011 21:37:06 -0500 So...(I'm a hacker, not a programmer)...as I understand this, if I get the new sources into my limey box I can compile them with the new source? I have a slackware linux laptop where I made my own limey one time, and it worked fine (on a D201 board before you folkis combined that with the D945 stuff) The ACID distro I downloaded on Saturday has to be right, it works like a champ on the printer port. Also, in the docs it does not mention that pin 11 is available, and I peeked at the source and found that it was, and it did work. The controller I married it to has COS on pin 11, I didn't feel like soldering. OK, Jim, thanks for the info/insight. GeorgeC ----- Original Message ----- From: Jim Duuuude To: george@dyb.com ; jd0@broadsci.com ; app_rpt mailing list Sent: Tuesday, August 30, 2011 9:28 PM Subject: RE: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux That's an interesting question. Normally, what we do is take a snapshot of the SVN sources and make the 'files.tar.gz' file which contains the release version of the sources. This file is used both for ACID and Limey Linux. The ACID version of this has been released already. The 1.1.5 version of Limey Linux is still in the "needs to be verified" (without the Asterisk stuff first) stage. So, it *is* possible to make these changes "appear" in the Limey distro. However, I am going to have to talk with Steve, WA6ZFT and see how he wants to handle this. JIM WB6NIL From: george@dyb.com To: telesistant@hotmail.com; jd0@broadsci.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux Date: Tue, 30 Aug 2011 21:23:53 -0500 Thank you, sir. Are you doing a new Limey store-bought tgz file, just add "dd"? I tried rolling my own, and modified the kernel config for pp compiled in, not a module, and still didn't fly. I gave up and stuck with dsp decode of pl and cos. But I also suspect that the "motorboating" goes away if the software isn't doing all that other stuff, and just looking for a line to wiggle high ot low, etc. THAT allows easy interface to many radios. Take care. GeorgeC W2DB 2360 ----- Original Message ----- From: Jim Duuuude To: george@dyb.com ; jd0@broadsci.com ; app_rpt mailing list Sent: Tuesday, August 30, 2011 9:19 PM Subject: RE: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux Well, it would pretty much appear that my suspicion is correct. The PP input stuff NEVER worked under Limey Linux, and its pretty obvious why. I will update the chan_usbradio and chan_simpleusb code to reflect this. JIM WB6NIL > From: george@dyb.com
To: jd0@broadsci.com; telesistant@hotmail.com; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux
Date: Tue, 30 Aug 2011 20:54:00 -0500
Hey guys, I really need some help with ppin. Works finew with ACID, ppx-ptt works fine, under both distros, pp in for cor just will not work in Limey, and I have no more hair to pull out. Does pp work as an input under Limey, and docs I find doesn't say it does not work, but I gave up hope and just deployed the system with a hard drive, which isn't the way I needed to go.
Is it possible to use as an input?
I have it loading parport and parport_pc, thies EPP and ECP in the bios, and
every combination of setups. I know I have it configured right, same config
worked just fine in ACID
The only thing that could make Limey even more perfect is RTL8187 wireless support and parallel port input for COS.
GeorgeC
W2DB
----- Original Message ----- From:
"Jeff DePolo" <jd0@broadsci.com>
To: "'Jim Duuuude'" <telesistant@hotmail.com>; "'app_rpt mailing list'"
<app_rpt-users@ohnosec.org>
Sent: Tuesday, August 30, 2011 8:00 PM Subject: Re: [App_rpt-users] Parallel port I/O
withchan_simpleusb/usbradiounder Limey Linux
>
Yes, I'm using them as BCD outputs to steer a "memory-agile" GE Delta-S remote base radio under Limey. You'll probably recall you and I going back and forth on some bug fixes a while back to get it working. The biggest
problems were related to ioperm permissions; I think I fixed the last of
the bugs myself.
--- Jeff WN3A
-----Original Message-----
>> From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude
>> Sent: Tuesday, August 30, 2011 12:45 PM
To: app_rpt mailing list Subject: [App_rpt-users] Parallel port I/O with chan_simpleusb/usbradiounder Limey Linux
>>
Has anyone ever successfully used the PPIO (*not* GPIO) extensions of chan_usbradio and/or chan_simpleusb under Limey Linux??
I think I have run into one of those famous old "how in the world did this EVER work" sorta things. I dont think it did.
>> If anyone has, please let me know.
>> JIM WB6NIL
>>