Thanks of everyone's inputs on this problem an insight into the Wouxun HT problems. For reveiw I have been helping a young ARC install an AllStar system (a couple of states away form my location). Since it is not feasible for everyone to buy a new HT, we have decided to change out the radio to an Alinco DR-135 which I own and works with Wouxun HTs on my AllStar site. On Mar 9, 2013, at 1:15 PM, Kirk Just Kirk <wb6egr@gmail.com> wrote:
The $50 radios tend to suffer from "Twist" when sending touchtones. Some don't even have Pre/De on the transmit/receive audio! Some manufactures think that 2Khz of deviation is OK, others think 6Khz is better.PL levels are all over the place too! I set my Motorola stuff to 700Hz of PL deviation..seen some Baofengs doing 200Hz..another one was 1Khz of PL... My though on this? set your system up with a REAL RADIO.Tell the ching-chong, bing bong (with eggroll) radio owners to GET THEM TUNED UP AND ALIGNED..... Why butcher your system to accept their substandard emissions?
Kirk
On Sat, Mar 9, 2013 at 10:37 AM, George Zolla <gazolla@san.rr.com> wrote: Great idea! I had already se the carrier from = usbinvert and ctcssfrom = no before we ran the tune checks.
I will ask the radio technician on site to redo the test. (I am offsite)
On Mar 9, 2013, at 10:46 AM, "Scott Weis" <kb2ear@kb2ear.net> wrote:
While carrierfrom = dsp, ctcssfrom = dsp do the following:
asterisk –r radio tune rxnoise
Does the system tell you success of failure?
If success do:
Key radio with correct CTCSS tone encoded and type:
radio tune rxtone
Does it say success or failure?
Please post results.
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of George Zolla Sent: Saturday, March 09, 2013 12:54 PM To: Bryan D. Boyle Cc: John Wheatly; Chris Drummond; app_rpt-users@ohnosec.org; Wally Baker Subject: Re: [App_rpt-users] DTMF number 3 Problem
Correction:
I cannot TX or RX when I return to the default settings:
carrierfrom = dsp ctcssfrom = dsp
Sorry about that.
On Mar 9, 2013, at 9:41 AM, George Zolla <gazolla@san.rr.com> wrote:
Bryan,
Unfortunately when I return the setting to the default:
carrierfrom = dsp ctcssfrom = dsp
I can receive or TX. Also some additional information from the operator:
"Yaesu did not work. TYT worked. ICOM HT worked...don't know about the mobile...And the Wouxun works well with other DTMF systems on Taos Ski Valley and NM Mega-Link...could be a wouxun problem, but don't think so."
Your response and any other ideas are appreciated,
George K6GAZ
On Mar 9, 2013, at 8:55 AM, "Bryan D. Boyle" <bdboyle@bdboyle.com> wrote:
wouxuns are kind of notorious for poor DTMF encoding, levels, etc. for the price, kind of to be expected. YGWYPF.
i'm thinking the motos were set up to put cor, etc out in hardware. your changes told asterisk to ignore the hardware signals. put them back the way they were working before you fiddled with them, and i'm thinking you'll be fine, cheap chinese HTs notwithstanding.
-- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings...
On Mar 9, 2013, at 11:42, George Zolla <gazolla@san.rr.com> wrote:
We recently installed AllStar on an old PC. At present we have a 10 year old Motorola 2M Radius radio connected to the AllStar PC via a custom cable and URI. The radio was tuned by a professional with tuning equipment according to the AllStar instructions. We can RX well and can TX voice well on all radios. Now the problem. Some radios (Yaesu & Icon) can send any DTMF number combination and works flawlessly. However some other radios like the Wouxun can send any number but the number "3" key successfully. For instance *81 gives us the time successfully but 3 used in any string doesn't work. I have modified only two usbradio.conf settings:
carrierfrom = usbinvert ctcssfrom = no
When I change to:
ctcssfrom = dsp
we can neither TX or RX.
Is there another setting that might help in the usbrdio.conf or any other config file? Can anyone help? It is a young ARC and most members use a Wouxon HT.
Thanks in advance,
George
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users