Kevin,Brian; I have been trying to set up use of radiousb instead of simpleusb. I see here Brian is doing that with the issues he is having. I can't get nearly that far. I am running hamvoip rc19 on some and recently downloaded stretch. In both cases I set the usbradio module to load however I cannot get the driver to work and keep getting asterisk failures. Additionally the menus set up by the programmer show only simpleusb-radio-tune not radio-tune-menu. Is there another image or procedure I need to run to get this started? Tnx, Mark WB2ERS -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Kevin Custer Sent: Monday, December 24, 2018 2:57 PM To: Users of Asterisk app_rpt; Brian G Subject: Re: [App_rpt-users] CM119 USB interface On 12/24/2018 12:21 AM, Brian G wrote:
Ok, I'm thick sometimes :) I get what you're saying now, makes sense. Thank you for the clarification. The Motorola is working as you described, the other rigs not so much.
So the gist of it is, there's no way to use DSP carrier detect without using discriminator audio? It's CTCSS or VOX only in that case?
Correct - BUT, discriminator audio should be available from that M120 radio. You just have to hook it up and possibly program it correctly. Kevin _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.