Thanks, Ken, Mike. I spotted it in the source code. Since it's not that severe issue, I'll take my time to look into it. K On 2018/08/29 0:15, Mike wrote:
Would appear to be a natural echo of a normal event then. Chase down Ken's lead and perhaps you may need to go to the source and eliminate the 'echo' line "dependent on what is flagging it".
Sorry, I'm not much help outside of that.
...mike/kb8jnm
On 8/28/2018 10:05 AM, K. Ishikawa wrote:
Mike,
-vv .. doesn't make a difference. Even without -v, it generates the message. Well it's not a big deal, but when I want to see radio related debug messages (e.g., keyed, carrier detect, etc.), they are buried in this particular message and scrolled out of screen instantly. Since it generates 50+ same messages in a second(!), I just feel something maybe minor (I hope) is not working as it should be. I just wondered someone in the group had any clue.
K
On 2018/08/28 21:52, Mike wrote:
While I can't answer your debug question, I run asterisk in the foreground and set verbosity to a desirable level to see what I want to see.
asterisk -r -vvv - The more v's the more verbose
Perhaps that may help...
But, what is the issue with "rxctcssdecode = -1" your tracking ?
...mike/kb8jnm
On 8/28/2018 5:55 AM, K. Ishikawa wrote:
Hi to the group, When I set "radio set debug" in CLI, the screen is inundated with a flow the following message. It keeps printing the same message so fast that I can't catch other debug messages. Can anyone advise how I can eliminate this, please? [Aug 28 18:32:39] NOTICE[3013]: chan_usbradio.c:2913 usbradio_read: rxctcssdecode = -1, chan Radio/usb_2132 The node itself is working well, as far as I can tell. It's on R-Pi 3 with URI. Thanks, K
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- JI1BQW