In the config on your allstar node for the extension you created for your cellphone, add a line of nat-yes and give it a try. Only do it for that extension though. Sip and Nat don't play well together. Make sure and do a 'reload' at the CLI after making the changes. Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bill Hurlock Sent: Sunday, February 09, 2014 6:26 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] SIP Help Needed I use CSIP Simple on my cell Phone. When I'm on my local WiFi all is well. If I go on the road and log into a WiFi system somewhere. I can register the account but it only seems to be a inward path only. When I watch CLI remotely, I see the connect, Answer, Wait, Playback going out OK but hear nothing on the Cell phone end. Than I see some CLI error messages that seem to point to the fact it isn't getting info back from the Cell phone end after which it processes a disconnect. Is this a port issue at the distant end of the link or something I have wrong on the Server end?? As I mentioned it works perfect when logged in on WiFI on the same network as the server. IAX clients seem to be having a similar issue connecting from the cell however IAXRpt works OK from the cell phone network using my PC to connect home to the server. Any ideas on this as I know people are using SIP OK out in the field. Bill Hurlock CPCommunications 856-234-1661 Office 856-264-1010<http://www.totalrf.com/> Cell www.cpcomms.com<http://www.cpcomms.com/> WA2TQI -- This message has been scanned for viruses and dangerous content, and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=3FBE480495.A580C&token=7168afdb8519d5626f1fa94f695b7b0b> -- This message has been scanned and is believed to be clean.