Mark, A quick question, Can you make this node work using the dahdi driver ? Please test that and let me know. ...mike/kb8jnm On 1/1/2019 12:26 PM, Mark DuMoulin wrote:
Mike,
Thanks for the reply. Here is what I have in the HamVoip RC.19
Rpt.conf
[1400] ; Change this to your assigned node number
; Channel Driver settings ; Define a channel driver to use and which ; interface within that channel driver ; To define a radioless node use the ; psuedo channel driver - rxchannel=dahdi/pseudo rxchannel=Radio/usb1400 ; Example usbradio channel driver ;rxchannel=SimpleUSB/usb ; Example simpleusb channel driver ;rxchannel=dahdi/pseudo ; Example pseudo channel driver
List of programs in asterisk
[root@1400_Home_Test asterisk]# ls amd.conf indications.conf asterisk.conf local chan_dahdi.conf logger.conf dnsmgr.conf manager.conf dundi.conf modules.conf echolink.xxx rpt.conf extensions.conf rpt.conf.sample extensions.conf_2018.12.30.2105 rpt.conf_2018.12.30.2105 extensions.conf_2018.12.30.2113 rpt.conf_2018.12.30.2113 extensions.conf_2018.12.30.2114 rpt.conf_2018.12.30.2114 extensions.conf_orig rpt.conf_orig features.conf simpleusb.conf iax.conf simpleusb.conf_2018.12.30.2113 iax.conf_2018.12.30.2105 simpleusb.conf_2018.12.30.2115 iax.conf_2018.12.30.2113 simpleusb_tune_usb.conf iax.conf_2018.12.30.2114 sip.conf iax.conf_orig usbradio.conf.xxx
usbradio.conf.xxx
; Usbradio channel driver Configuration File ;
[general]
[usb1400]
hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=0 invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0
#includeifexists custom/usbradio.conf
Modules.conf
; ; Asterisk configuration file ; ; Module Loader configuration file ;
[modules] autoload=yes ;noload=chan_voter.so ;noload=chan_usbradio.so ;noload=chan_irlp.so ;noload=chan_echolink.so ;noload=chan_simpleusb.so noload=app_hamvoip.so
;noload=res_crypto.so ;noload=func_callerid.so noload=chan_oss.so noload=chan_alsa.so noload=chan_phone.so noload=res_config_pgsql.so noload=cdr_pgsql.so noload=app_radbridge.so noload=app_festival.so noload=app_queue.so noload=func_odbc.so noload=chan_mgcp.so noload=chan_skinny.so noload=cdr_custom.so noload=cdr_csv.so noload=chan_agent.so noload=chan_simple2.so noload=func_moh.so noload=res_musiconhold.so noload=res_speech.so noload=res_odbc.so noload=res_smdi.so noload=res_config_odbc.so noload=chan_tlb.so noload=app_milliwatt.so noload=app_image.so noload=app_sendtext.so noload=format_h264.so noload=app_hasnewvoicemail.so noload=app_ices.so noload=app_lookupblacklist.so noload=app_voicemail.so noload=chan_usrp.so noload=app_lookupidname.so noload=app_zapateller.so noload=format_jpeg.so noload=app_parkandannounce.so noload=app_meetme.so noload=app_settransfercapability.so noload=app_amd.so noload=app_followme.so noload=app_transfer.so noload=app_directed_pickup.so noload=app_flash.so noload=app_page.so noload=app_gps.so noload=pbx_dundi.so noload=app_setcallerid.so noload=app_dictate.so noload=res_adsi.so noload=app_mp3.so noload=app_privacy.so noload=app_disa.so noload=app_alarmreceiver.so noload=app_externalirv.so noload=chan_beagle.so noload=chan_sip.so [global]
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Mike Sent: Tuesday, January 01, 2019 11:10 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] CM119 USB interface
Mark,
Can you show me the line in your rpt.conf where you are loading the channel.
ie rxchannel = Radio/usb_29285
And your usbradio.conf file text
...mike/kb8jnm
What
On 1/1/2019 9:19 AM, Mark DuMoulin wrote:
Kevin,Brian;
I have been trying to set up use of radiousb instead of simpleusb. I see here Brian is doing that with the issues he is having. I can't get nearly that far. I am running hamvoip rc19 on some and recently downloaded stretch. In both cases I set the usbradio module to load however I cannot get the driver to work and keep getting asterisk failures. Additionally the menus set up by the programmer show only simpleusb-radio-tune not radio-tune-menu. Is there another image or procedure I need to run to get this started?
Tnx, Mark WB2ERS
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Kevin Custer Sent: Monday, December 24, 2018 2:57 PM To: Users of Asterisk app_rpt; Brian G Subject: Re: [App_rpt-users] CM119 USB interface
On 12/24/2018 12:21 AM, Brian G wrote:
Ok, I'm thick sometimes :) I get what you're saying now, makes sense. Thank you for the clarification. The Motorola is working as you described, the other rigs not so much.
So the gist of it is, there's no way to use DSP carrier detect without using discriminator audio? It's CTCSS or VOX only in that case? Correct -
BUT, discriminator audio should be available from that M120 radio. You just have to hook it up and possibly program it correctly.
Kevin _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.