I have also changed the gain and currently it is committed out am not sure of the version of chan_echolink and app_rpt ( how do you tell ) but this is a fresh copy of Acid downloaded this week also what is the node??? is it my Echolink node # if it is then I have tried it as well [el0] confmode=no call=W0IOU-R ; Change this! pwd=mypassword; Change this! name=TEST Testing Asterisk-EL-channel-driver ; Change this to your real name! qth=TESTING ; Change this to your actual QTH! email=myemail@gmail.com; Change this! maxstns=20 rtcptimeout=10 node=123456 ; Change this! recfile=/tmp/recorded.gsm astnode=2345 ; Change this to your active Allstar node number! context=radio-secure server1=server1.echolink.org server2=server2.echolink.org server3=server3.echolink.org ;erxgain=10.0 ; defaults to -3.0 db ;etxgain=10.0 ; defaults to 3.0 db. On Fri, Aug 14, 2009 at 5:21 PM, James Nessen <nessenj@jimsoffice.org>wrote:
What does your echolink.conf file look like??
(please remember to omit your echolink password)
Jim
On Aug 14, 2009, at 2:51 PM, Todd Birkenholtz wrote:
Thanks James.
Unfortunately this is not the case. I have verified both UDP ports are sent from my router to my internal server 192.168.2.110. I also have run the windows Echolink and ran the test firewall function and I can verify my ISP does not filter the ports.
The following is a tcpdump of the inbound connection to my Asterisk box on a connect to verify the conversation makes it to my Asterisk box.
[root@test ~]# tcpdump host 204.13.148.174 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 14:37:49.056574 IP 204.13.148.174.5199 > 192.168.2.110.5199: UDP, length 96 14:37:49.056869 IP 204.13.148.174.5198 > 192.168.2.110.5198: UDP, length 36 14:37:49.057182 IP 192.168.2.110.5198 > 204.13.148.174.5198: UDP, length 74 14:37:49.057785 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 76 14:37:49.585296 IP 204.13.148.174.5199 > 192.168.2.110.5199: UDP, length 96 14:37:49.585602 IP 204.13.148.174.5198 > 192.168.2.110.5198: UDP, length 36 14:37:51.637508 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637515 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637521 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637526 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637532 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637537 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637542 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637547 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637552 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637558 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637563 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637568 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637573 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637578 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637583 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637588 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637592 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637597 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637602 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36 14:37:51.637607 IP 192.168.2.110.5199 > 204.13.148.174.5199: UDP, length 36
Thanks again.. I really appreciate the help
Todd
On Fri, Aug 14, 2009 at 3:39 PM, James Nessen <nessenj@jimsoffice.org> wrote: If your node is behind a firewall, it sounds like you don't have ports 5198 and 5199 udp forwarded into your node. If your node sits out on a public IP, make sure your upstream ISP doesn't filter on those ports.
Jim / K6JWN
On Aug 14, 2009, at 11:47 AM, Todd Birkenholtz wrote:
Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo
Any Idea on why no audio in my inbound Echolink connections?
My echolink inbound connection looks like this.
In extensions.conf
[radio-secure] exten => 2345,1,Answer exten => 2345,n,Playback(tt-weasels,skip) exten => 2345,n,Hangup
*CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call: new CALL=W0IOU,ip=204.13.148.184,name= Todd -- Executing [2345@radio-secure:1] Answer("echolink/el0-12", "") in new stack -- Executing [2345@radio-secure:2] Playback("echolink/el0-12", "tt-weasels|skip") in new stack -- <echolink/el0-12> Playing 'tt-weasels' (language '') -- Executing [2345@radio-secure:3] Hangup("echolink/el0-12", "") in new stack == Spawn extension (radio-secure, 2345, 3) exited non-zero on 'echolink/el0-12'
Thanks
On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman <szingman@msgstor.com> wrote: Todd Birkenholtz wrote:
Fellow Hams and PBX tinkerer's
I want to provide a auto-patch and a repeater dial-in for our club repeater using my existing home Asterisk PBX in a Flash setup. Our club repeater is connected to Echolink so I was thinking about creating a Echolink node on my server that users could link to then I would allow an outbound call. On the reverse I would like to provide a repeater dial-in number that would route through my Asterisk server to our club's node via Echolink. Keeping in mind at no time does my Asterisk server actually communicates with a radio directly it is just acting as a Echolink gateway.
I have been experimenting with ACID but it appears the radio/usb driver is preventing Asterisk from loading without a actual usb radio connected. If I noload=chan_usbradio in the modules.conf file then Asterisk appears to load but I am still having problems with refrence to it in my rpt.config file.
I have been able to configure a Echolink connection but I cant send audio to the connected node when the remote station connects but the Asterisk debug indicates it is. Does anybody have a working Echolink node that they would like to share their iax,echolink,rpt and extensions config file with me.
Todd, Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not need the hardware.
73, Steve N4IRS _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users