I am willing to work with you, to get it working. please send me a direct email with your contact info and when you are available. I am blind but have multiple allstar under my control. uour first node is always a challenge. having flat audio from the receiver is essential. also in your email please answer what instructions have you used to wire up the 888 radio and modify the uri Thanks 73 Neil Sablatzky K8IT Allstar Node 41838 KITLINK Allstar Node 42087 KITLINK HUB IRLP Node exp0068 Echolink K8IT-L WIRES-X K8IT 11479 Room 21479 -------------------------------------------------- From: "David Waters" <dwaters5@yahoo.com> Sent: Sunday, February 04, 2018 6:04 PM To: <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] 888 and usb
I have a modified 888 radio and run through a modified fob to my AllStar node. The problem is when sending a DTMF command the computer never receives it and displays a 6~. On screen. Tried everything under usb simple to get it to work but nothing works. Someone said to use us radio. Conf but I don’t know how to force the AllStar software to run that file. It picks us simple.conf instead. Any help would be appreciated. Keep in mind I know nothing about AllStar software I am just learning.
David Waters _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.