Messages from incoming connections may be prevented with the telemdefault = 2. This isn't perfect because an incoming connect message will be heard if it's shortly after a local connect has been performed. But it works 99% of the time and prevents the constant and very annoying drive-by Echolink connections. telemdefault = 2 ; 0 = telemetry output off ; 1 = telemetry output on (default = 1) ; 2 = timed telemetry output on command execution and for a short time thereafter. Messages from cron (I assume via localplay) cannot be stopped on repeater activity. What Steve was suggesting with tail messages might work for you as they can be stopped upon repeater activity. If you don't need the message sent at specific times, tail messages might be the ticket. ; ; The tailmessagetime,tailsquashedtime, and tailmessages need to be set ; ; to support tail messages. They can be omitted otherwise. ;tailmessagetime=300000 ; Play a tail message every 5 mins ;tailsquashedtime=30000 ; If squashed by another user, ; ; try again after 30 seconds ;tailmessages=msg1,msg2,msg3 ; list of messages to be played for tail message On Fri, May 3, 2019 at 8:11 AM Duane Fowler <selkie2@comcast.net> wrote:
It's not about changing messages, it's about inhibiting crontab'd schedule stored message broadcast on the RF hardware(local) during EL/ASL QSOs. Earlier, we had ASL nodes connected to us and the announcements broadcast on top of the traffic. Duane
Sent from Mailspring <https://getmailspring.com/>, the best free email app for work _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP