David, Your tip did the trick! Why would an update change the rpt.conf duplex setting to 1 from 2? All other settings stayed the same. Thank you! Greg, W2GCM -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of app_rpt-users-request@lists.allstarlink.org Sent: Thursday, August 02, 2018 12:00 PM To: app_rpt-users@lists.allstarlink.org Subject: App_rpt-users Digest, Vol 114, Issue 2 Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. After last update to audio is not working (Greg Mohr) 2. Re: After last update to audio is not working (Mike) 3. Re: After last update to audio is not working (JJC) 4. Re: After last update to audio is not working (David McGough) 5. ASL without OSS (JJC) ---------------------------------------------------------------------- Message: 1 Date: Wed, 1 Aug 2018 16:57:08 +0000 From: Greg Mohr <Greg@gmohr.com> To: "app_rpt-users@lists.allstarlink.org" <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] After last update to audio is not working Message-ID: <EC6B484460B0724596A8E89BFF6B542B72B181E5@SRV-MOHR.mohrnet.local> Content-Type: text/plain; charset="us-ascii" I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person. I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file? Thank you, Greg W2GCM