One master can support one or more nodes, each node with one or more clients. The master must be on the node with the RTCM that is on the same ethernet segment as the server. Here's a sample config... [general] port = 667 password = xxxxxxx [2521] Blueridge = aaaa1,transmit buflen = 500 [2529] SanJuan = xxxx1,transmit buflen = 500 plfilter = yes [2531] Santiago-UHF = rxxxy1,transmit Lukens-UHF = rxxxy2,transmit Sunset-UHF = rxxxy3,transmit PV-UHF = rxxxy4,transmit TestUHF = rxxxy5,nodeemp buflen = 180 thresholds = 255,110=5 linger=15 txctcss = 136.5 txctcsslevel = 55 txtoctype = notone ;streams = 184.154.228.18:1667 ;streams = wd6awp.net:1667 plfilter = yes [2532] Santiago = yyy1,transmit Huntington = yyy2,master,transmit PV = yyy3 Woodfern = yyy4 TestBench = yyy5,transmit buflen = 200 thresholds = 255,110=5 linger=15 plfilter = yes -- Tim :wq On Sep 17, 2013, at 8:06 AM, Sam Skolfield <kj6qfs@gmail.com> wrote:
Correct me if I am wrong, but an app_rpt server can only handle one master timing source. Wouldn't that throw a wrench in the possibility of running multiple voted nodes on one server?
On Tue, Sep 17, 2013 at 4:38 AM, Bill Hurlock <bill.hurlock@cpcomms.com> wrote: I need to put together a private node network that has 12 separate repeaters with 2 voting sites each. The systems are all co located on one rooftop. The voter paths will be over Ubiquity rocket IP networks.
The questions are,
1. How many nodes can be run on a single server with each node containing 1 main TX/RX and 2 voting sites?
2. How do you config the nodes to not be part of the Allstar network?
3. Is there a recommended PC configuration for a server , i.e. CPU speed, Memory, etc.?
Bill Hurlock
CPCommunications
856-234-1661 Office
856-264-1010 Cell
www.cpcomms.com
WA2TQI
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- KJ6QFS Sam Skolfield _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users