Mark, You can have different tones on the same fob but no separation for a node. While it 'might' be possible to separate left and right channel audio for 2 nodes if configured, you would need to separate cos/ptt sources not on the same fob, like using Parallel port etc. Can't advise better since you did not state all the methods used. ...mike/kb8jnm On 1/2/2019 12:06 PM, Mark DuMoulin wrote:
Kevin,
Can different ctcss tones be associated with a single USBFOB identified and configured as a separate node?
Tnx,
Mark
-----Original Message----- From: Kevin Custer [mailto:kuggie@kuggie.com] Sent: Tuesday, January 01, 2019 12:34 PM To: Mark DuMoulin; Users of Asterisk app_rpt Subject: Re: [App_rpt-users] CM119 USB interface
In looking at your config (quickly) it looks like you aren't loading chan usb in the modules.
Kevin
On 1/1/2019 12:25 PM, Mark DuMoulin wrote:
Kevin,
I downloaded ASL 1.01 and had the same issue as with the RC.19 When I try to use it asterisk fails claiming to not find the chan.
I'll put it back in and try again to give you feedback.
Tnx! Mark
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.