Sorry, I am unable to follow you on this to check. All of my pi's are in use and my ASL image is amuck, After booting, you may need to enable write mode manually and put your files on manually. But it sounds like the image is a bit messed up. You might want to try downloading anew and try again on a different sd if you have it. Perhaps also check that the pi is able to get the required (enough) current and that it's cpu isn't getting to hot, especially during a install. Just things to check/do. ...mike/kb8jnm On 7/2/2018 11:32 AM, Bryan Taylor wrote:
Vfs: mounted root ext4 file system readonly on device......
Now why would that happen I wonder....
Getting closer thanks for the tips...
Sent from my iPhone
On Jul. 2, 2018, at 12:57 p.m., Mike <mm@midnighteng.com> wrote:
That sounds like a more reasonable explanation.
...mike/kb8jnm
On 7/2/2018 11:26 AM, Bryan Taylor wrote: I also installed a program before the last reboot and that has disappeared too...
Almost like sd card is in readonly mode... anything written to sd card is flushed after a reboot
Sent from my iPhone
On Jul. 2, 2018, at 12:49 p.m., Mike <mm@midnighteng.com> wrote:
For a test ...
try renaming "node-setup" to 'node-setup-bu'
in /usr/local/sbin
If it stops good but you still need to find where it is loading from.
If it has no effect, don't forget to change the name back.
...mike/kb8jnm
On 7/2/2018 11:12 AM, Bryan Taylor wrote: Searching through here now looking for an option...has to be something reloading config files from some backup from the initial install, haven’t located it yet. I can edit them and get the node running until it reboots then it reverts back to older config files
Sent from my iPhone
On Jul. 2, 2018, at 12:40 p.m., Mike <mm@midnighteng.com> wrote:
I could be wrong, but the behavior sounds like you are downloading the config files from allstar.org.
How you are doing that would be unknown. But i think that is what you need to look for.
It will not do that automatically on it's own as I know it to be. Some other script invoking that ?
...mike/kb8jnm
On 7/2/2018 11:05 AM, Bryan Taylor wrote: Question about version 1.01,
I have one here that automatically rewrites the configuration files, ssh port keeps resetting to default, for.conf keeps reverting to a copy that has errors in it, manager.conf keeps getting replaced...
What function or script do I need to shutoff to keep it from overwriting the config files with what appears to be a backup copy...
Thanks Bryan Vo1mxz _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.