This would take all of a few minutes to do - the up/down on a Pi GPIO part I mean. Look up this: WiringPi | | | | | | | | | | | WiringPi GPIO Library for the Raspberry Pi | | | | Steven Donegan KK6IVC General Class FCC License FAA PP-ASEL Pilots License Silver State Car #86 www.sscc.us From: George Csahanin <george@dyb.com> To: app_rpt-users@lists.allstarlink.org Sent: Saturday, February 25, 2017 6:51 PM Subject: [App_rpt-users] parallel port The Pi parallel lines would be perfect. This really keeping me from using Pi on more radios. Having to modify the CM108 FOB is a pain. I have some that are not globbed. I also bought a pile of CM108's and was going to come up with my own but Kevin Custer beat me to that one. He has a somewhat less costly URI. But can't beat $6 for a USB FOB and wiggle a line on the Pi's I/O. I saw that VK stuff too, there was some other-than-technical reason I was told to not use it, but it is a hazy memory. And the other group (arm-allstar or whatever it is called flat out said that they won't do it. Shouldn't have skipped those "C" classes so I could roll my own. :-) GeorgeC W2DB Node 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.