I was assuming you did know how to select which CT from the stored CT's But here it is for others reading... unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ..mike/kb8jnm
At 17:31 05/07/2015, Barry wrote:
Hi
In rpt.conf
what controls the courtesy tones or the type of tone? I am sure you can edit this to change beep and beep pip to some kind of Morse Character K or B etc.
Am reading.. http://ohnosec.org/drupal/node/96 mykey=!t(tone group)[(tone group)][...]
just not making complete sense to me at this time.. learning curve its been only 6-years of allstar hi.
Barry
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.