Think he was talking about audio OUT to the radio, not the two inputs. ----- Original Message ----- From: Doug Crompton To: app_rpt-users@ohnosec.org Sent: Friday, March 07, 2014 11:42 PM Subject: Re: [App_rpt-users] USB URIx overmodulation problem? There is a better description of that at the DMK site. http://dmkeng.com/images/URIx%20Data%20Sheet.pdf Pin 9 in labeled Mic_in_DC which in essence means direct coupled. It is a low level input and if you were to use it you would definitely need to capacitively couple to avoid damage. If for some reason you are using pin 9 switch to 21 and that should solve your problem. See the schematic at the DMK site to understand the difference between pin 9 and 21. 73 Doug WA3DSP http://www.crompton.com/hamradio
Date: Fri, 7 Mar 2014 22:32:12 -0800 From: cypresstower@yahoo.com To: n9jpg.ham@gmail.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] USB URIx overmodulation problem?
Assuming one knows about the rxboost=x setting in the usbradio.conf.
The URI has 2 audio inputs, pin 21 and pin 9. Pin 21 is padded, pin 9 is not. Motorola's work well on pin 21, but occasionally it may be necessary to use pin 9 along with some minor modifications to properly adjust rx audio. In this case, look at the RIM from repeater builder. It has only one audio input and a selectable audio input attenuator. You don't need any extra parts or mods. Their input attenuator works well with a URI. The RIM has some other unique advantages one might consider. JK -------------------------------------------- On Thu, 3/6/14, Kevin Oleniczak <n9jpg.ham@gmail.com> wrote:
Subject: [App_rpt-users] USB URIx overmodulation problem? To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Date: Thursday, March 6, 2014, 12:17 AM
I'm using a URIx module with my radio and am in the process of adjusting audio levels. I'm following the well documented procedures to set rx and tx levels but noticed that that choices in txvoice levels have little or no effect. I've made some measurements with my service monitor.
radio tune txvoice 10 >> 0.35Khz deviation radio tune txvoice 14 >> 4.8Khz deviation radio tune txvoice 15 >> 4.8Khz deviation radio tune txvoice 20 >> 5.2Khz deviation radio tune txvoice 100 >> 5.2Khz deviation
radio tune txvoice 500 >> 5.2Khz deviation radio tune txvoice 900 >> 5.2Khz deviation
With a goal of 3KHz deviation, its not possible through settings alone. Any ideas why this is so touchy?
thanks
-----Inline Attachment Follows-----
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 9516 (20140307) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. __________ Information from ESET NOD32 Antivirus, version of virus signature database 9516 (20140307) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 9516 (20140307) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com