Oops... forgot the URL http://stats.allstarlink.org/dl/installcd/centos6/ -----Original Message----- From: kk6ecm [mailto:kk6ecm@gmail.com] Sent: Wednesday, September 09, 2015 6:40 PM To: 'mike@midnighteng.com'; 'app_rpt group email' Subject: RE: [App_rpt-users] ACID (Centos 6.7) 2.6.32-573.3.1.el6.i686 -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of mike@midnighteng.com Sent: Wednesday, September 09, 2015 5:25 PM To: app_rpt group email Subject: Re: [App_rpt-users] ACID (Centos 6.7) Can you manually check kernel version uname -r Where did you get "acid_centos6" image ? I'm just trying to check you did not wipe a centos 6 install with a 5.x install and was a bit confused with some of your terms. ...mike/kb8jnm
Board - Gigabyte Intel NM70 Chipset HDMI SATA 6Gbps Mini ITX DDR3 1600 Intel Motherboards GA-C1007UN-D
I was never able to get either ACID CentOS 5.10 or 6.7 to work with this board. The audio did not work. I used uridiag to test the audio at that time. The digital portion passed, but not the audio. I've not loaded uridiag onto th3 ACID CentOS 6.7 build to see if it works.
On 8-17-2015 I burned a CD using acid_centos6 downloaded 9/23/2014 Used the CD to perform a fresh install from a USB CDROM drive, following the on-screen instructions on 8-17-2015, then left it because I ran out of time.
Today I booted it back up, connected to internet and the URIx.
Then performed a 'yum update' at the command line
Then fixed Zaptel after the yum update in accordance with http://docs.allstarlink.org/drupal/node/111
Then hooked up the amplified speaker to the URIx as a baseline test to confirm the audio still did not work, and IT DID! Audio is clear.
At least that is what my notes say. I don't remember doing anything else.
Hope this helps, Bob kk6ecm
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of mike@midnighteng.com Sent: Wednesday, September 09, 2015 4:16 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] ACID (Centos 6.7)
Could you say what the chipset and/or board is you installed 0n ?
And did you upgrade the kernal and software ot a fresh install ?
...mike/kb8jnm
What I'm saying is, it's working. I'm running the URIx, with audio out. I've not checked the total interface, but the audio that did not work before is working now after a him update and the follow-Zapata repair per the allstarlink instructions. Is it possible something got "fixed" with the Tim update? What do I need to do the make sure it is fully functional besides integrating it with a repeater, which I may have time to do this weekend.
Thanks, Bob kk6ecm
Sent from iPad
On Sep 9, 2015, at 3:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
The USB and/or audio stuff in Centos 6 is broken.
That is why we have never released a Centos 6 based version of ACID.
From: kk6ecm@gmail.com To: app_rpt-users@ohnosec.org Date: Wed, 9 Sep 2015 15:20:31 -0700 Subject: [App_rpt-users] ACID (Centos 6.7)
I decided to try to work on ACID (CentOS 6.7) after several failed attempts in the past. I loaded up the CD, did a yum update, then fixed zapata. I have it running now. It seems to work fine with the URIx, and I can connect to other Allstar nodes. I have the URIx connected to an amplified speaker, and the audio comes through fine. I am using iaxRPT with it. When I tried to get it working before, I could not get any of the audio functions working. The interesting part is I'm running in on a mini-ITX with a newer chipset that I could never get to work with the current (CentOS 5.10) ACID release. The digital (i.e. PTT) worked fine, but none of the audio pieces.
Am I missing something? I'm using the acid_centos6.iso file from 9/23/2014.
Thanks, Bob kk6ecm
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.