I use the following line in rpt.conf for the stream. outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --highpass 0.2 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml By adding --scale n, where n is a number less than 1 you should be able to lower the level, I haven't tried this but it should work. outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --scale 0.8 --highpass 0.2 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -c /etc/ezstream.xml For reference: http://lame.cvs.sourceforge.net/viewvc/lame/lame/doc/html/switchs.html Steve On Tue, Nov 6, 2012 at 10:24 AM, Alan Adamson <adamson_alan@hotmail.com> wrote:
I'm using the command in the rpt.conf file to stream audio to an Icecast server, but I need to somehow lower the level on what it sent to the server… Would anyone know how to do that… I'm assuming because it's sent through the console interface that I might be able to string some commands together or the lame stuff can do it, just looking to lower it by 3 to 6 db if possible.
Thanks,
Alan
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- IMPORTANT: This email is intended for the use of the individual addressee(s) named above and may contain information that is confidential privileged or unsuitable for overly sensitive persons with low self-esteem, no sense of humor or irrational religious beliefs. If you are not the intended recipient, any dissemination, distribution or copying of this email is not authorized (either explicitly or implicitly) and constitutes an irritating social fauxpas. No animals were harmed in the transmission of this email, although the mutt next door is living on borrowed time, let me tell you.