I would strongly suggest the Ubiquity Titanium Bullet 2-Gig wifi running in bridge mode to reach your remote repeater. I have several such links installed at work running Chromatograph traffic from remote sites, a link from my house to my daughter 10 miles away at 54-mbits for her internet, and tested a "hinternet" link from my house to a broadcaster's tower on Sandia Crest (34 miles) carrying some camera traffic at full frame rate. (That link at 'legal power' was only getting 1-mbits.) As I recall, the record for a Hinternet link is around 100 miles on mountain hops... Tom KE5QFK On Sun, 2014-06-08 at 10:02 -0700, Bob wrote:
We have two sites, one with internet access, and the other does not. The site with internet has a two node Allstar server, with one node connected to the local 2 meter repeater, and the second connected to a 70cm radio used as an audio link to a second 2 meter repeater one mountain range over (knife edge effect... not LOS). The second 2 meter repeater has a mating 70 cm radio to complete the audio link. Linking the two 2 meter repeaters is accomplished in the Allstar server via radio or over the internet. Depending on the range to the remote site, there may be a wi-fi option (wireless access points) within shared bands, using your call sign as the ssid (e.g. Ubiquiti, or Tranzeo). Hope this gives you some idea of the possible.
thanks,
Bob
kk6ecm
______________________________________________________________________ From:app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Robert Newberry Sent: Sunday, June 08, 2014 8:16 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] No internet
Maybe my search-fu needs work. I'm trying to read what or what not my options are for deploying a repeater at a site with no internet access.
The best I can figure is somehow getting it there by my own means.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.