Hi guys, I recently re-built the node that interfaces to my controller, and one of the things I noticed after re-building it that there was a fairly long hang time, anywhere from 5-10 seconds. I have the following set, and unless I'm misinterpreting how this is expected to work, could this be a potential bug? duplex = 0 ;0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; disables forcing physical half-duplex operation of main repeater while ; still keeping half-duplex semantics (optional) I am still testing, but setting the the hang time to "0" appears to have fixed it, I also tried setting other params to "0" in the wait-times section: hangtime = 0 ; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms) althangtime = 0 ; longer squelch tail [wait-times] telemwait = 0 ; Time to wait before sending most telemetry idwait = 500 ; Time to wait before starting ID unkeywait = 0 ; Time to wait after unkey before sending CT's and link telemetry calltermwait = 0 ; Time to wait before announcing "call terminated" Anyone else run into this, or is this working as expected? Hardware is a Raspberry Pi 3 B+ and Repeater Builder RIM "lite" SCOM interface. 73 Stephen K1LNX