I mentioned this to someone else, QRP Labs has a kit that creates a OCXO around the Si5351 chip. here is the link: http://www.qrp-labs.com/ocxokit.html If you couple this with another kit of theirs you can program it it any frequency you want. My only thought is would it be accurate/stable enough. http://www.qrp-labs.com/progrock.html <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Mon, Jun 6, 2016 at 11:36 AM, David McGough <kb4fxc@inttek.net> wrote:
Hi Joe,
While on the subject of the Si5351 chips, the application of converting one reference clock to a secondary frequency is what they were designed for. So, since you've already got a GPS reference, this -might- be an inexpensive starting point...For this application, you obviously won't need all the bells and whistles presented in this article! See:
http://www.knology.net/~gmarcus/Si5351/Si5351_VFO_QEX.pdf http://www.knology.net/~gmarcus
Note that I would replace the Si5351 25MHz reference with a decent TCXO (available on ebay, etc.)....Note that I haven't used the Si5351 with an RTCM, there may be simpler/better ways???
73, David KB4FXC
On Mon, 6 Jun 2016, Joe Moskalski wrote:
It seems clear that in order for simulcast to work properly with the RTCM I will need to clock the CPU to the GPSDO. Is there a device available to give you the 9.6 mhz reference from the 10 mhz out from the GPSDO or does anyone have a schematic available so that I can build them myself?
< https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
Virus-free. www.avast.com < https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
<#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.