Hi Mike, I have a Simplex node, Hardware is Dell Latitude D600, connected to WLAN at 150mpbs. External ADSL is good, 15580mbps download speed. Running Top indicates: top - 17:55:39 up 5 min, 2 users, load average: 0.14, 0.22, 0.12 Tasks: 71 total, 2 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 2.3%us, 0.3%sy, 0.0%ni, 97.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 514596k total, 216224k used, 298372k free, 15360k buffers Swap: 1020116k total, 0k used, 1020116k free, 139908k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2466 root 15 0 39152 18m 5584 S 2.7 3.6 0:10.81 asterisk 2809 root 15 0 2312 1008 812 R 0.3 0.2 0:00.01 top Interface is modified CM108 USB device. The problem I have, is when unconnected to any node. When connected, all is good - When station TXing on the link drops their TX, courtesy pip. All good. The Issue is obviously something local, as whenever a signal is RXed locally, the box responds with a courtesy pip and a CWID and then drops carrier. But then proceeds to key up numerous times (anywhere between 6 & 14 at the last count), each key up giving a pip and then dropping carrier. If I go into rpt.conf and set unlinkedct=0, it will still key up multiple times - but no tone. If I set duplex=0, the problem goes away (but I get no courtesy tones - but I still get "function complete" etc ok). Something is looping somewhere.... it's just a case of trying to find it! rpt.conf is pasted below! Cheers, James [29681] ; Change this to your assigned node number rxchannel=Radio/usb29681 duplex=1 erxgain=-6 etxgain=-6 ;controlstates=controlstates scheduler=schedule29681 morse=morse29681 macro=macro29681 functions=functions29681 phone_functions=functions29681 link_functions=functions29681 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iG0FHM F accountcode=RADIO hangtime=50 althangtime=100 totime=170000 idtime=300000 ;politeid=3000 linktolink=1 idtalkover=|iG0FHM F unlinkedct=ct1 remotect=ct1 remotetx=ct1 linkunkeyct=ct1 nolocallinkct=1 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 holdofftelem=0 ;beaconing=1 ; ; *** Status Reporting *** ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux. ; ** For ACID *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ** For Limey Linux ** ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ; Morse code parameters, these are common to all repeaters. ; [morse29681] speed=30 frequency=800 amplitude=4096 idfrequency=800 idamplitude=1024 [schedule29681] ;dtmf_function = m h dom mon dow ; ala cron, star is implied 80=00 * * * * 80=15 * * * * 80=30 * * * * 80=45 * * * * 81=00 * * * * [functions29681] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8 80=status,1 81=status,2 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down 99=cop,43 980=status,3 ;99=cop,6 ; Place command macros here [macro29681] 80=*80 81=*81 [telemetry] ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ct1=|t(2175,0,50,8192) ;ct2=|t(660,880,150,2048) ct2=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) ct3=|t(2175,0,150,4096) ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ct8=|t(700,1100,150,2048) ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) remotetx=|t(2175,0,150,8192) remotemon=|t(1209,0,50,2048) cmdmode=|t(900,903,200,2048) ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) functcomplete=|t(350,0,100,8192)(500,0,100,8192)(660,0,100,8192) ;functcomplete=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ;functcomplete=|(2175,0,300,8192) patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times] telemwait=2750 idwait=2750 unkeywait=500 calltermwait=2000 ; ; This is where you define your nodes which cam be connected to. [nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here. ;29681 = radio@127.0.0.1/29681,NONE ; Memories for remote bases [memory] ;00 = 146.580,100.0,m ;01 = 147.030,103.5,m+t ;02 = 147.240,103.5,m+t ;03 = 147.765,79.7,m-t ;04 = 146.460,100.0,m ;05 = 146.550,100.0,m #includeifexists custom/rpt.conf