From: Doug Crompton Sent: Wednesday, January 29, 2014 9:23 AM To: Douglas Waugh Subject: RE: [App_rpt-users] lsnodes Doug, Did you get my previous email? 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: doug@crompton.com To: waughdj@msn.com Subject: RE: [App_rpt-users] lsnodes Date: Tue, 28 Jan 2014 12:19:21 -0500 Doug, You are right. My check was for node numbers > 100000 but I failed to look for leading 0's. Looking at the list I would say that 95%+ of the nodes are truly 100,000 or above. I think I have nade a change that will correct that but I want to test it. Do you have an Allstar node I can connect to where echolink nodes that fit the leading 0 and less than 100000 number are connected 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: waughdj@msn.com To: app_rpt-users@ohnosec.org Date: Tue, 28 Jan 2014 01:48:33 -0600 Subject: [App_rpt-users] lsnodes Doug, I noticed one thing that happens when Echolink nodes are listed. If you have zero’s in front of the node numbers they don’t register the calls. It says No info. Is there any way that the zero’s can be omitted from the text for them to show the right callsigns.. Examples are 007059 and 057275. Thanks ahead of time. KC0EQA, Doug _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.