Perfect, thanks Mike. The auto generated usb conf files also have a decimal point, another numeral, a colon, and another numeral. Any idea what those represent, and if they should be present? From: Mike mm@midnighteng.com Sent: March 31, 2019 21:08:06 To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] USB fob choppy/stuttering audio It denoteds the bus/hub and port on the bus/hub Each bus uses one irq line in addressing, so if there is a problem, switch buses not ports. There are 2 ports generally, to each bus/hub. Perhaps this helps : lsusb Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter <--------- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub usbradio_tune_29285.conf [usb_29285] ; name=usb_29285 ; devicenum=2 devstr=3-2 <----------- rxmixerset=700 txmixaset=300 txmixbset=300 rxvoiceadj=0.950000 rxctcssadj=1.200000 txctcssadj=200 rxsquelchadj=400 ...mike/kb8jnm On 3/31/2019 8:51 PM, Rob Noll wrote:
Nothing in lsusb's output is representative of the info in the devstr line in the usb conf file. The device line is a single digit number as is one of the data points displayed by lsusb, however, the device line is commented out in every usb conf file I've looked at.
From: Steve L kb9mwr@gmail.com Sent: March 31, 2019 20:48:09 To: Users of Asterisk app_rpt app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] USB fob choppy/stuttering audio
No problem and for future reference:
lsusb is a utility for displaying information about USB buses in the system and the devices connected to them.
https://linux.die.net/man/8/lsusb
On Sun, Mar 31, 2019 at 7:11 PM Rob Noll <rob@nollmail.com> wrote: Thanks for the reply. I didn't wish to name the USB device as I didn't want to appear to be giving it a bad name if it was not the culprit. Sorry you feel I didn't give enough information to begin narrowing down the problem.
At a suggestion I received elsewhere, I tried HamVoIP to see if the issue was the same. The audio is perfect with HamVoIP. Since I'd rather implement this setup on an existing Debian system instead of having a dedicated device, I'd like to try to figure out a way to get ASL working with this device. One gentleman suggested looking into the device ID and making sure it was correct, however, he didn't know how to determine the correct information. At any rate, some light reading has informed me that there seems to be some serious bad blood between HamVoIP and ASL, so since I've gotten to the point where the issues exists in one but not the other, and is therefore in the software and not the hardware (be it the cpu, radio, or interface), I suspect I'm better off trying to figure it out on my own.
Thanks to everyone who took the time to respond.
Rob
From: Steve L kb9mwr@gmail.com Sent: March 31, 2019 20:01:00 To: Users of Asterisk app_rpt app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] USB fob choppy/stuttering audio
What would be very beneficial to all is when you post a question on any list (be it Allstar or whatever); is to identify and share as much as you can in terms of software you are running as well as hardware.
Example: ASL 1.01 Raspbian Stretch Image on a Raspberry Pi 2b Interface: DMK USB URI Radio: Motorola Maxtrac Issue: Choppy Transmit audio
Since there are multiple combinations of software and hardware, folks really need to elaborate. No one is a mind reader. It would help if you are running the hamvoip image to post the question to their list at: http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Since there are a number of differences between the distros and the fact theirs is closed, one cannot even begin to really guess at what the issues might be as as you cannot see what is different at a code level even if you share as much detail about your configs.
In my opinion each can have its place (one for more experienced users which to be able to roll their own/experiment and one for fairly new to Linux), however I would rather at some point see the two groups work together again. Till such a time users just need to realize what they are running, and who to go to for support, else it just creates a guessing game and further hostility.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.