Hi, I've read the Limey docs, saw the D2700MUD was supported and got one. Now building the system, but not with a lot of Linux exp. Drive Question: I could use a 128MB CF card in a CF/SATA adapter, or I see the D2700MUD board has a Mini PCIe port where I could put an SSD. The SSD would be a clean cable, all-components-on-the-motherboard system and looks attractive. If I used an SSD, would I still be able to use the standard Limey binary/image intended for the CF? RTCM vs URIx and system scalability/performance: I'm aiming to use this system to control a co-located VHF and UHF repeater. (ICOM FR-5000/6000) It may also have an additional repeater or link added over time - possibly 4 radios. Do I need to be concerned about performance of this D2700 system with 4 radios? Is there a performance advantage in using the RTCM as the radio interface in that it seems to process COR in the RTCM rather than n the PC? Any hints or tips would be appreciated. Thanks, Randy