Follow the directions: type "help radio" atom2*CLI> help radio radio active Change commanded device radio key Simulate Rx Signal Present radio set debug Radio Debug radio set debug off Radio Debug radio set xdebug Radio set xpmr debug level radio tune Radio Tune radio unkey Simulate Rx Signal Lusb atom2*CLI> [root@atom2 ~]# There are seven "radio" commands and a number of sub commands. For example "radio tune" atom2*CLI> radio tune Active radio interface is [usb27021] Device String is 3-2 Card is 0> Output A is currently set to auxvoice. Output B is currently set to composite. Tx Voice Level currently set to 700 Tx Tone Level currently set to 100 Rx Squelch currently set to 775 Usage: radio tune <function> rxnoise rxvoice rxtone rxsquelch [newsetting] txvoice [newsetting] txtone [newsetting] auxvoice [newsetting] save (settings to tuning file) load (tuning settings from EEPROM) All [newsetting]'s are values 0-999 atom2*CLI> help radio 73 Ken
-----Original Message----- From: Bryan Fields [mailto:Bryan@bryanfields.net] Sent: Sunday, June 08, 2014 10:36 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Dead key macro?
On 6/8/14, 10:30 AM, Geoff wrote:
W5OMR*CLI> radio active key set tune unkey KB9MCI*CLI> radio No such command 'radio' (type 'help radio' for other possible commands)
Am I missing some module?
Thanks,
-- Bryan Fields
727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net