Thanks Jim. I will give it a try. On 16 May 2011 15:00, Jim Duuuude <telesistant@hotmail.com> wrote:
Try downloading the uridiag program from:
http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn&view=...
Un-tar it and 'make' it, then run './uridiag' and use option 'c' and it will tell you how to make a connector for running the diagnostics.
This is the program that DMK uses to for production testing of a URI.
JIM WB6NIL
------------------------------ Date: Sun, 15 May 2011 23:11:58 -0400 From: craig.hastings@gmail.com To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Trouble with my USB URI
I had a note up and running well with not any real issues, however after about 4-6 months, the system no longer detected carrier on the cor line.
Sometimes it would think its always on and sometimes it would think its off.
I checked the voltage at the line from the radio and that was working as it should.
I even reprogrammed the radio to try it voltage high instead of low for carrier. This did not make any difference.
I have tried several radios Radius M100 CM300. All work fine on the IRLP machine and all show proper voltage on the COS signal.
I have the DMK URI with the eprom.
Can anyone suggest any other diagnostics? I would like to get the Node back up and running and/or order a replacement URI
Craig VA3DTF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users