Sounds like the system may be configured for full duplex, with a single radio attached (more than likely for a simplex application). Check the duplex value in rpt.conf Ramesh. Sent from my iPhone On 2013-08-07, at 2:56 PM, pete M <petem001@hotmail.com> wrote:
what radio are you using for your test, receiver and transmiter.
did you do the audio level tuning?
are you using radio usb or simple usb?
Envoyé de mon iPad
Le 2013-08-07 à 14:35, "David Dean" <david@k0pwo.com> a écrit :
Hello to the group.
I am working on my first node and I am unable to make a connection to another node using my radio. I am able to connect to other nodes when using the CLI without problem. But when using the keypad on a radio I get nothing.
When transmitting tones on a radio keypad and watching the CLI instead of seeing the coorect dtmf tone I see the following message
"-- Hungup 'Zap/pseudo-879579846' -- Hungup 'Zap/pseduo-1210393799' -- Hungup 'Zap/pseduo-441974974'
And that is it.
Can someone tell me if I have a file that is messed up, missing or possibly it is my host radio connected to the node.
Thanks,
David -- David Dean, K0PWO Arapahoe County, Colorado (720) 350-2053 cell _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users