Could you be falsing DTMF? That'll cause a short drop in audio, and tends to happen on hard driven punchy audio. You'll see it show up in the asterisk CLI if you're in verbose mode. Cheers, Jesse
On Mar 31, 2016, at 10:30 AM, Skyler F <electricity440@gmail.com> wrote:
On my 900MHz node, I am having problems where the "repeat only" and various transmissions sound clipped and scratchy. I turned my audio down the the lowest setting (so I had to really crank my receivers audio) and even the small, barely deviated amount of audio that came out was scratchy when Allison announced "repeat only".
Has anybody had this issue before? The clipped audio only seems to occur on transmissions with a lot of punch, and is fine for both. Both adjusting the deviation on the radio and turning my TX audio down to a bare minimum does not seem to do the trick.
Audio levels is not a problem, however. We tested it on a service monitor and got the deviation fine with the test tone.
Thanks Skyler _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.