What user radio are you using to talk to the Icom? Are you by chance using DPL instead of PL? At least one vender of handhelds drops DPL when sending DTMF. Not good. PL and DTMF works fine in their radios. tnx Mike / W5JR Alpharetta GA
On Aug 16, 2014, at 7:03 AM, Doug Crompton <doug@crompton.com> wrote:
Wayne,
If I an interpreting what you are describing correctly it sounds like "talk off" - the node radio is dropping the COS signal when it sees audio in its RX. If that is the case then you either have an off frequency condition either in the node receiver or the radio you are TXing with into the node receiver or it is way over deviating. It could also be a PL problem. Too low a PL level from the TXing radio or a poor decoder in the nodes receiver could also cause that. Have you looked at levels?
Look at the COS line with a meter when you are transmitting into the node receiver. If you see it jump around then it is not an Allstar problem. It should be steady during reception into the node RX - either high or low depending on the direction your node RX COS goes when it receives.
73 Doug WA3DSP http://www.crompton.com/hamradio
From: wgreenleaf@hawaii.rr.com To: app_rpt-users@ohnosec.org Date: Fri, 15 Aug 2014 19:29:25 -1000 Subject: [App_rpt-users] Issue with simplex node
HI all,
Wondering if anyone may have experienced a similar problem. My simplex node operating duplex=1 (w/telemetry) will unkey and transmit in the middle of entering dtmf tones to it. For example as I’m enter *3node it will unkey at the star or sometimes at the 3 and sometimes at the end of the string at the last number and then sometimes it will work. Also, there are times I can be talking on the node and right in the middle of my transmission it will drop then come back when it goes back to receive. This has been baffling me for sometime.
Setup:
Desktop computer
DMK URI
Icom f6011 mobile
Thanks
Wayne
Kh6mei
This email is free from viruses and malware because avast! Antivirus protection is active.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.