That error message is a bit deceiving; but I'm not really sure why it comes off that way... the last line actually tells you how to resolve the issue. It's easy to miss it (I've done it more than once). Remove the menuselect.makeopts file and re-run "make menuconfig" -- it's always cleared up that issue for me anyhow. While you're in there, if you really want to disable the chan_usbradio driver, you'll have the option. 73 - Jeremy, KD0EAV On 12/24/11 09:13, Michael J. Wolthuis wrote:
I am trying to build the SVN on CentOS. I can not use an ACiD load on this node because it has other functionality I cannot remove.
Zaptel is building fine, but Asterisk throws an error on chan_usbradio.
I think I am missing some dependencies, but can not figure out what. Here is the error I get when building asterisk:
*********************************************************** The existing menuselect.makeopts file did not specify that 'chan_usbradio' should not be included. However, either some dependencies for this module were not found or a conflict exists.
Either run 'make menuselect' or remove the existing menuselect.makeopts file to resolve this issue. ***********************************************************
make[1]: *** [menuselect.makeopts] Error 255 make[1]: Leaving directory `/usr/src/astsrc/asterisk' make: *** [llastate/asterisk-installed] Error 2
I do not need chan_usbradio on this box, but would prefer to figure out what dependencies I am missing and build it if possible for future use.
Mike kb8zgl
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users