Steve your suggestion did the trick. I really appreciate everyone help with this. Thank you. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 chrisviningre@gmail.com Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre On Tue, Sep 20, 2016 at 4:33 PM, Steve Zingman <szingman@msgstor.com> wrote:
In your pictures you have txmixa set to no and txmixb set to voice. Notice the comment that txmixa is the left channel. set it to voice. Set txmix b to no.
On 09/20/2016 06:10 PM, Chris Viningre wrote:
I hope this works. I haven't learned how to copy a file and send it in an email on the other computer. The transmitter audio is on pin 22 Left_Out. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 chrisviningre@gmail.com Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre
On Tue, Sep 20, 2016 at 12:50 PM, Steve Zingman <szingman@msgstor.com> wrote:
Chris, Could you please post your simpleusb.conf. Please tell us what pin on the URI you are using to feed the transmitter. Did you try setting transmitter level with simple-tune-menu?
Steve
On 9/20/2016 2:26 PM, Chris Viningre wrote:
The software is Dail that I downloaded from Allstar. The radio is a GE Mastur II VHF. The configuration was downloaded from the Allstar portal. rpt.conf is set for duplex.
Thanks Steve for turning me on to the simple-tune-menu.In there I could see my squelch was opening and showing sound on the sound meter and keying the transmitter. I removed the receiver output wire on pin 21 (correct mic pin ?)and monitored through a headphone. I could hear myself come through the receiver. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 chrisviningre@gmail.com Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre
On Tue, Sep 20, 2016 at 4:24 AM, Steve Zingman <szingman@msgstor.com> wrote:
Chris, Are set to duplex in rpt.conf? simpleusb-tune-menu is a good program to test your configuration.
73, Steve N4IRS
On 09/20/2016 04:01 AM, Chris Viningre wrote:
Update: I made some changes in the simpleusb.conf file and was able to get the keying problem solved. Still no audio being transmitted from the receiver. I hear myself talking in the monitor and with headphones on pin 21 but still transmitter keys but no audio. Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 chrisviningre@gmail.com Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre
On Mon, Sep 19, 2016 at 6:40 PM, Chris Viningre <chrisviningre@gmail.com> wrote: > > > Greetings from a ham radio dummy. I'm old to ham radio but new to > setting up repeaters, Allstar and URI. Also lost working with Linux. > Yes pretty much a disaster looking for a place to happen. I have a > repeater running with a RC-100 controller on VHF. I'm attempting to > add a link to a linked system over Allstar. I have removed the old > controller and wired the URI. To the best of my knowledge I have the > wiring correct, but I could be wrong. I downloaded the Linux software > from the Allstarlink website and made a bootable disk. I loaded the > Debian with Asterisk software only, Not the Graphical version. At the > end of the install I manually added my information. I put my node > number and password number in. I followed the support information > from > the Allstar site and did a node download from Allstar. I checked for > my node on the Allstar list and it is listed. I called the link phone > number and I can get through the login but it doesn't seem to connect > to my link. I get a busy signal and it hangs up. When I key a HT the > repeater sometimes comes up. Most of the time I have the key the PTT > 2 > or 3 times in a row to make it key up. Either way I get no audio out > of the transmitter other then the IDer and beep. I hear the receiver > just fine. I have search for help all over the internet, but what > information I find is like a Texan trying to read Arabic. I speak > Texagain so I'm not really the best with the English language. At > lease according to my wife. Well I'm hoping maybe someone can help > me > get this working or lead me in some kind of direction. Thank you. > > Chris Viningre > 70 W. Roadrunner > Salt Flat, Texas 79847 > C:(915) 504-1510 > chrisviningre@gmail.com > Amateur Radio Operator: WS5B > https://www.qrz.com/db/ws5b > http://www.reverbnation.com/chrisviningre
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Just say no to world domination"
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic