Hi Stephen, I guess, in your scenario, the ping-pong is generated from repeater TX hang times? So, something like: 1) User keys up "Repeater A" directly. 2) Simplex AllStar link "Radio 1" hears "Repeater A" TX audio and/or hang time and repeats to the hub. 3) Simple AllStar link "Radio 2" connected to same hub keys and brings up "Repeater B" 4) "Repeater A" unkeys, "Radio 1" COS goes inactive, "Radio 2" unkeys. 5) "Radio 2" hears "Repeater B" TX audio and/or hang time, keys hub, "Radio 1" and "Repeater A". 6) "Repeater B" unkeys, "Radio 2" COS goes inactive, "Radio 1" unkeys. 7) Goto 2 and repeat forever 73, David KB4FXC On Fri, 26 Aug 2016, Stephen - K1LNX wrote:
Hi guys... I am in the midst of deploying a 5 site system. All of the sites with the exception of my own will be using link radios sitting on the repeater pair, some sites do not have internet access so this is the only option. Each node will be permalinked to our hub.
What we discovered when we brought site number 3 online was the dreaded "ping-pong" effect, and I did some digging and found out about the rxondelay parameter, that seems to be the place to start with this.
The other option we are considering is dropping the hang time off each repeater and using app_rpt to do hang time and courtesy tones instead (duplex = 1 instead of 0) but not sure that would work real well or be optimal.
Anyone have any experience with a setup like this that can offer some advice? This is my first foray into this unfortunately, I've always just interfaced the radio or repeater directly to app_rpt in the past or through a controller so it's been a bit of a challenge.
73 Stephen K1LNX