Hi men, IAX provisionning is for the old ATA form Digium, named IAXY or S101i. The firmware and its config file is pushed to the ATA when registried to Asterisk. So, you have no config file for such device in the correct directory, thats all... No Matter ! Bindaddr is another thing. May be you haven't defined the Ethernet port to address (0.0.0.0 for all local ports on the machine is ok) ? Best 73's from F6HQZ Francois Le 08/03/2010 13:04, Stephen - K1LNX a écrit :
I have this exact same issue, I was trying to setup an IAX trunk to another machine and encountered the same error upon reload.
I haven't tested it, but I suspect my IAX connections are failing as well.
Stephen K1LNX
Sent from my iPhone
On Mar 7, 2010, at 10:22, "Ramesh Dhami (VA3UV)"<Ramesh@va3uv.com> wrote:
Hi Guys;
One of the nodes that I administer is giving the following error, when trying to do an iax2 reload:
iax2 reload == Parsing '/etc/asterisk/iax.conf': Found [Mar 7 10:19:44] NOTICE[2839]: chan_iax2.c:10022 set_config: Ignoring bindaddr on reload == Loaded firmware 'iaxy.bin' [Mar 7 10:19:44] NOTICE[2839]: iax2-provision.c:518 iax_provision_reload: No IAX provisioning configuration found, IAX provisioning disabled.
Consequently, no IAX connections (inbound or outbound) are being accepted.
Any ideas?
TIA,
Ramesh. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users