Sounds like it's really a "Notchplexer".....OK for home use but thats about it. Since you have very low power your going to lose most of it in the filtering. Run 2 antennas and a single can on the RX...
------------------------------ *From:* "mike@midnighteng.com" <mike@midnighteng.com> *To:* app_rpt-users@ohnosec.org *Sent:* Sunday, October 4, 2015 4:09 PM *Subject:* Re: [App_rpt-users] First duplex repeater - question about duplexor/power amp
You can not do that.
Even if you could, how you would get a rx sig back through the amp ? While it was working ? It's the reason for the duplexer.
Think about it for a few.... FULL DUPLEX We all have those moments....
...mike/kb8jnm
Is there any reason why the power amp cannot be placed between the duplexor and antenna? My repeater will be 2 modular 1 watt radio modules, a 20W capable 6 cavity duplexor and a Mirage power amp.If the amp is after the duplexor then cool, if not then a more expensive duplexor will be required... TIA Â Steven Donegan
KK6IVC General Class FCC License Silver State Car #86 www.sscc.us_______________________________________________
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.