all,
There is a 44 page document on dl.allstarlink.org which may answer a lot of questions about how to configure app_rpt and Asterisk on an ACID system. Hopefully, this will answer a lot of the same questions we keep seeing on the list.
Excellent! But ... this brings up a new question. Where do your bandwidth numbers come from for the chart on page 6? Is that the total bandwidth in *both* directions? The numbers are about a double of the 17kbps I calculate for EchoLink. { (8000 samples/second) / (160 samples/gsm frame) / (4 gsm frames/packet) = 12.5 packets/second. or 1 packet every .08 seconds. Each packet consists of an IP header and an UDP header so (12.5 packets/second) * (20+8+12+(33 * 4)) bytes/packet) * 8 bits/byte = 17200 bits/second.} 73's Skip WB6YMH