Brian It's in iax.conf You can use the keyword "bindport=" or you can add the port to the number in "bindaddr=" (node:port) This port number needs to be in your router too and in the registration server (use the portal to specify the port you selected) Also, if you have any non-registering nodes in that system, the port number needs to be explicitly used in identifying those nodes to the other system. 73 Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Bryan D. Boyle Sent: Thursday, September 20, 2012 10:17 PM To: app_rpt mailing list Subject: [App_rpt-users] changing IAX port
I'm installing a second computer here to drive Yet More RF out of the House of RF here...and since I'm doing so...wondering where on the mother ship do you change the port that IAX is configured for.
I think I see where, in the config files, you change it...but, obviously, the head end has to know where the handshake is supposed to go.
Am I missing something? Not that that would be out of character (according to my bride...), but...just thought I'd ask.
Tnx
Bryan WB0YLE _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users