I am without a problem. What result are you getting? On 07/10/2016 10:04 AM, Ramesh Dhami wrote:
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others!
Sent from my iPhone _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic