One of the ways to test registration is to add the register line to another server on a different network. I'm one of the Allstar admins so I can lookup your node password. I added your 2577 node to a test server here at home. As you can see (below) it assumes the port I have configured for this node. All is ok, system is working the way it's suposed to. I suspect 'iax2 show registry' on your system has long shown the incorrect ports, but it still worked because the portal configuration overrode the network reported port. The new system uses the port reported by the network and ignores the portal config. That has advantage of not needing to set you server port on the allstarlink.org site. So now you need to figure out why the network is reporting the wrong port. Hope this helps. I've removed your registration from my node as the test is complete. *CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 2577 47.157.254.238:4567 60 Registered 44.98.254.145:4569 Y 2502 47.157.254.238:4567 60 Registered On Sun, Aug 12, 2018 at 12:59 PM Greg Stahlman <kj6ko@innercite.com> wrote:
Getting this on a couple of my nodes this morning.
[Aug 12 12:55:50] NOTICE[2004]: chan_iax2.c:9712 socket_process: Registration of '29827' rejected: '<unknown>' from: '67.215.233.178'
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Michael Wolthuis Sent: Sunday, August 12, 2018 9:22 AM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] BIG registration problem this morning
I have seen this before if you are using PFSense as your outbound router and you are NOT static locking NAT outbound, it will pick a port at random. Other firewalls have also done it if not set for static, but most consumer grade routers do NOT mangle NAT this way.
Mike Kb8zgl
On 8/12/18, 12:06 PM, "App_rpt-users on behalf of Bryan Fields" < app_rpt-users-bounces@lists.allstarlink.org on behalf of Bryan@bryanfields.net> wrote:
On 8/12/18 12:06 PM, Paul - KN2R wrote: > I have all set and been using port 44569 for well over a year on that > server. > Now this morning the registration server is reporting the incorrect port > number of 54799. > I Never used that number. Now inbound connections are not working any more.
Ok, are you behind NAT? What are you doing there that iax is not connecting outbound with a source port of 44569?
I just pulled a dump of your traffic to the registration server and I see you're hitting it with a source port of 54799, not 44569. I think this has to be some nat funkyness, using a different outgoing port vs incoming.
Can you check that and give some details if you are behind nat as to the setup you have?
Thanks, -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP