Try setting the carrierfrom=usbinvert. Then it will look for an active low from the PTT line. Setting it to usb looks for a logic high. (active hi) Jon VA3RQ On 8/10/2012 2:41 PM, Michael J. Wolthuis wrote:
I connected my LOX board port 1 up to my linkcomm Club Deluxe controller. I ran PTT from LOX to COR on Linkcomm.
However, I see the beagle.conf is set to carrierfrom=dsp and ctcssfrom=dsp
I turned ctcssfrom=no
And I tried carrierfrom=usb
But it still acts like DSP? In other words, it doesn't key up until there is audio there. Maybe that is normal???
I am new to the LOX and Allstar, so sorry if this sounds like a bad question, but I would expect if I key the radio Allstar would key up when carrierfrom=usb is selected to look for the PTT from the controller on the COR line of the LOX?
I am listening via WebTransceiver if that matters.
Mike
Kb8zgl
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users