On 8/30/2010 08:28, KI6PSP (Ed) wrote:
I am trying to add a playback fuction so I can add in a tail message telling everyone to press *50 for information, then use that to playback basic repeater command instructions. I have tested this several ways, and I can't seem to get it. Plus, during my testing, I think I set *50 to a *81# so it will tell me the time. It is no longer in the config, but it still does it, so I cant use *50. Here is a clip from my rpt.conf file.
[functions27178] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 ;50=playback 27178,rpt/nodenames/wa6ybn ;Testing, this didn't work 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8
80=status,1 81=status,2
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down
96=playback 27178,rpt/nodenames/wa6ybn ;Repeater just Donks at me ;989=cop,4 980=status,3 99=cop,6
; Place command macros here
[macro27178] 1=playback,rpt/nodenames/wa6ybn ;Repeater just Donks at me 2=*81# ;This one works ;Any others, it tell me Macro Not Found, so it must be finding the *51, but not playing the file. File is the same one for initial ID, and it works
Try the full file path for example ... A11=play,/var/lib/asterisk/sounds/rpt/nodenames/wa6ybn