Mike, All you need to do is make a phone patch to the "registered" ip phone. I know saying it that simple is not always that simple if you have never scrubbed through the phone patch section of extensions.conf (uses stanza of radio) You might want to create a new autopatch command as so to set new timeout values and mask dial tone and the like for those calls. Here is a example in phone patch of extensions.conf. [radio] exten => _5XXX,1,Dial(sip/${EXTEN},17) ;dials ext 5xxx on this box When you dial any 4 digit exten starting with 5, it will dial the call. You could list each ext but this is cleaner using wildcards. Keep your ext's grouped together by type so you can have some rules or group rules. You perhaps need routing for multiple boxes. There is much to know of rules of asterisk dialing. Start here and see where you get. Let me know and I'll guide you through as I can... ...mike/kb8jnm
-------- Original Message -------- Subject: [App_rpt-users] Autopatch type question From: Mike Lussier <mike.lussier@gmail.com> Date: Fri, January 09, 2015 9:12 am To: ALL STAR <app_rpt-users@ohnosec.org>
I have successfully setup my nodes on the bbhn mesh network. I setup IAX2 trunks from my RasPBX to each node. I can connect to the nodes from an IP phone and carry on a conversation using the keypad to activate the PTT and release it. What I haven't figured out is how to setup the system to allow a mobile or HT to connect to an IP phone. I'm not after dial tone and placement of calls but a way for folks to dial an IP phone in our ARES EOC room or another ham home if they aren't on the radio.
Any thoughts ?
Mike
--
*"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*<hr>_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.