Use *989 (cop,4) to generate a 1Khz tone at 3Khz dev. Use *989 to toggle it off again. -- Tim :wq On Mar 5, 2011, at 6:20 PM, Phil N6TCT wrote:
Thanks, Jim. But no, "susb tuna txa" (or txb) does not generate tone -- that was my question: what should I use to generate tone to get things calibrated?
Thanks!
Phi, N6TCT
On Sat, Mar 5, 2011 at 5:30 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
susb tune txa (or txb).. i dont remember whether it generates tone susb tune rx for rx and dont forget about susb tune rxdisplay
Date: Sat, 5 Mar 2011 17:13:53 -0800 From: phil.n6tct@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Transmit tuning with susb tune?
Ok, so much progress has been made now that Jim has me using "susb" instead of "radio" commands when using the simpleusb channel. :-) I really like "susb tune rxdisplay" for receive audio level tuning.
But: what is the recommend equivalent to"radio tune txvoice <xxx>" command, the one that would generate a 1 kHz tone at a what should be 3 kHz deviation so that I could use a service monitor to adjust the txgain appropriately? susb tune txa and txb just set the levels, they don't actually transmit.
Thanks!
Phil, N6TCT _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users