If you don't want to here the connect and disconnect messages you'll need to turn telemetry off. If I recall you can do that with a cop command Neal Garbenis Jr. NG8Y On Jun 1, 2012, at 12:19 AM, Tim Sawyer <tim.sawyer@me.com> wrote:
duplex = 0 ; Half duplex with no telemetry, courtesy tones or hang time linktolink = yes ; in case whatever you're hooking to likes full duplex
; these attempt to kill IDs but I have no idea if they would work. experiment! totime=0 idrecording=|i idtalkover=|i
Can't think of anything else you have to stop at the moment. Maybe others will chime in. -- Tim :wq
On May 31, 2012, at 7:47 PM, Alan Adamson wrote:
I want to create a completely tone(s) less connection on a uri. It’s a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc… Besides using the duplex=0, what else do I need to do to turn all of that off on that node?
If you have rpt.conf section that you could share it would be appreciated.
Thanks
Alan
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users