I have nothing but problems with an amd processor that I was using as my first node. A lot of it was audio related as well. I can't remember if it was Steve or Jim that ask me the very same question. I ended up trying an intel CPU on a pretty Low end machine and all my problems went away. I have built many nodes since for both myself and others and have never had that problem show up again. Corey n3fe Sent from my iPhone On Sep 11, 2013, at 6:39 PM, "Andreas Pleschutznig" <andy@ple.org<mailto:andy@ple.org>> wrote: Huh? Now you see me stumped. I can see some badly designed math library having a problem with that, but what does that have to do with the processor. I am not discounting the statement, just trying to gather information, and the statement does not just come through the filter I have in my brain as to makes sense. As far as the CPU goes, yes I do have an AMD chip: [root@s02 proc]# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 20 model : 1 model name : AMD E-350 Processor stepping : 0 cpu MHz : 1597.148 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc nonstop_tsc pni ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt ts ttp tm stc 100mhzsteps hwpstate [8] bogomips : 3194.29 processor : 1 vendor_id : AuthenticAMD cpu family : 20 model : 1 model name : AMD E-350 Processor stepping : 0 cpu MHz : 1597.148 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc nonstop_tsc pni ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt ts ttp tm stc 100mhzsteps hwpstate [8] bogomips : 3194.88 [root@s02 proc]# -- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823 On Sep 11, 2013, at 4:01 PM, Corey Dean <n3fe@repeater.net<mailto:n3fe@repeater.net>> wrote: Any chance you are using an AMD processor? If you tx tone and your voice are more than 999 combined, that could also be the problem. Corey N3FE From: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Kevin Custer Sent: Wednesday, September 11, 2013 12:45 PM To: Andreas Pleschutznig Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Distorted audio in app_rpt/Allstar On 9/11/2013 12:20 PM, Andreas Pleschutznig wrote: Best I can describe the effect is that the audio is time sliced in 20ms packets and every other packet is missing, left out. and it does not happen when audio is especially loud or quiet. Sometimes it happens on the time announcements, which are absolutely perfect 99% of the time. Sounds to me like a computer with too little RAM or too little CPU horsepower. When you run the top command, is it using swap memory? If so, that's bad...and you need more RAM. Kevin -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=A3CC12223.A96FE>