I fought this problem for days on a new install…. I installed several times, same problem. It turned out my Acid download and/or CD burn was corrupt. When I did a fresh download, burned a new CD, and installed from scratch, it finally started working. On Jun 10, 2012, at 8:30 PM, Travis Best wrote:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s:
Anyone have any ideas???? Just started out of the blue
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users