Hi Ramesh Some more info is needed here! Allmon runs as code on the web server, which does not have to run on the asterisk server. Where is the web server with the allmon code in relation to the asterisk server. Are they using the same dns? This is important. I did convert one of my allmon entries from an IP address to a hostname and it had no problem. If you do an nslookup on the system with the allmon code, what does it resolve the hostname to? Keith On 8/27/13 8:49 PM, "Ramesh Dhami (VA3UV)" <Ramesh@va3uv.com> wrote:
Hi All;
I have allmon running on a couple of my systems. On one of my reflectors, I show activity from a remote system (where the remote is also running allmon).
Recently, I discovered that on my reflector, the activity from the remote is no longer being displayed.
After a bit of digging, I found that if I specify an IP address for 'host=x.x.x.x' then it works fine. However, if I enter a hostname, allmon doesn't seem to resolve the hostname and I get an 'unable to connect' error message.
If I ping or telnet the hostname from a shell command, it resolves to the correct address, confirming that DNS resolution is working fine.
Any ideas?
Thanks!
Ramesh. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA